TPLinkRepeater

TPlinkwifi - TP Link Router Login - tplinkwifi.net Login

tplinkwifi

Tplinkwifi is the login address that allows the users to log in to the TP Link network. It helps you log in to the network and set up your extenders. TP Link is famous for providing its customers with feature-rich computer networking products. Moreover, it offers a wide range of products, including modems, routers, switches, mobile phones, range extenders, etc. TP Link extenders provide you with the ultimate internet speed by eradicating uninterrupted networking issues. However, it is mandatory for all the users to perform TP Link Login and set up their extender to use it. Many uses find it quite difficult to set up their extender. Therefore, in this blog, we have provided the step wise procedure to set up your TP Link extender in a hassle-free manner via tplinkwifi.net.

TP Link Login

In this blog section, we have provided the complete procedure to log in to the TP Link extender network without facing any issues. Therefore, all the users are suggested to follow the below guidelines to perform TP Link login:-

  • First of all, you need to connect your computer to the LAN port of the extender with the help of an Ethernet Cable. 
  • Now, you need to assign the Static IP address on the computer manually. 
  • To assign the address, follow these steps:-
  • Left click on the Start button-Control Panel-Network and Internet. 
  • After this, tap the Network and Sharing Center and Change Adapter Settings. 
  • Now, click on the Local Area Connection- Properties and double-click on the Internet Protocol Version 4(TCP/IPv4).
  • If your static address is 192.168.0.254, you can set the IP address as 192.168.1x. 
  • After this, open your internet browser and type tplinkwifi.net and press the enter key. 
  • Here, you need to type your username or password in their respective fields. 
  • Note: The default username and password of your TP Link Extender are “Admin.”
  • Once you have entered the credentials, hit the OK button. 
  • Now, you can proceed with the configuration. 

How to configure the TP Link Range Extender via TPlinkwifi

Once you have logged in to the tplinkwifi extender network, you can further proceed with the configuration procedure. Hence, to make it easy for the users, we have provided the stepwise procedure to configure the extender:-

Note: Before proceeding with the procedure, ensure that you have the following information for TP Link Extender Setup: – Lan IP, Encryption Type, SSID, and Passphrase

  • First of all, you need to perform TP Link login and navigate to the wifi extender management page.
  • Here, you need to select the Network option and then check the Range Extender IP Address. You must ensure that the IP Address or the extender is the same as the IP segment of the router. 
  • The users can also change the IP address to 192.168.1.250. Then click on the “Save” option. 
  • Click on the “Quick Setup” and “Next” options. 
  • After this, you should choose the “Range Extender” as the operation mode and click on the “Search” option. 
  • Now, find the SSID of your TP Link router from the available list and click on it. 
  • Then, you should click on the “Connect” option and press the “Save” button.  
  • Click Wireless and Wireless Security. After this, you should choose the WPA-PSK/WPA-PSK and Encryption AES.  
  • After this, click on the “Save” option. 
  • To confirm the settings, you should click on the System Tool and Diagnostic. Now, you will be required to enter your IP address 192.168.1.254 in the IP address bar. 
  • Then, click on the “Start” option.  
  • Now, you should set your computer to obtain the IP address on a permanent basis.

How to configure the range extender with the WPS button?

Here, we will mention the steps to configure your range extender with the WPS button:-

  • First, plug in your range extender to the power outlet, which is near your main router. 
  • Now, you should press the WPS button on your main router and then click on the WPS button available on the Range Extender. 
  • You should wait until the WPS button light blinks on both the extender and router. 
  • If the wireless signal LED of your TPLinkRepeater is off for two minutes, it shows that the WPS process has failed. In this case, you should press the WPS again. 
  • You should repeat the above process until you succeed. After completing the procedure via tplinkwifi.net, you can place the TPlinkRepeater wherever the network is slow. 

Conclusion

In this blog, we have provided the complete procedure for TP Link Login. In addition to that, we have also provided you with the step-by-step process to configure the extender via tplinkwifi. Apart from this, you can also easily configure the extender via Ethernet cable or by the WPS button.